Power Support Crystal Film for iPad
Protection from scratches is a must, and Power Support’s crystal film for iPad is the perfect solution.
This custom-fit screen protector allows for the vibrant colors of your LCD screen to shine through without compromising picture quality, touch screen sensitivity or any functionality of your iPad.
With advanced silicone static-cling adhesive technology, this film does not require a difficult installation process and is residue free.
- Set includes a crystal screen film
- Protects your precious LCD screen from scratches, dust, and dirt
- Advanced silicone static-cling adhesive technology leaves no residue if removed
- Film will not interfere with touch screen responsiveness
Film Installation Instructions:
Clean your screen with a lint-free cloth to remove any dirt.
Make sure that there are no dust particles or oil deposits on your screen.
Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.
Step 2: Align the edge of the film to your screen.
Step 3: Gently peel back the larger backing of the screen film
and allow screen film to fall onto your screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.
854616005269 - Power Support Crystal Film for iPad
MSRP: $59.00.
Special Price: $53.00.
Power Support Anti-Glare for iPad
With the amazing capabilities of the iPad in your hands,
why let the negative impacts of glare and fingerprints get in the way?
Power Support’s anti-glare film is a custom-fit film that will reduce the visual impacts of glare and finger printing while providing scratch protection. Equipped with an advanced static-cling adhesive, installation is easier than ever and will not leave a residue when removed.
- Set includes an anti-glare screen film
- Protects your precious LCD screen from scratches, dust, and dirt
- Reduces visual impact of fingerprints and glare
- Advanced silicone static-cling adhesive technology leaves no residue if removed
- Film will not interfere with touch screen responsiveness
Film Installation Instructions:
Clean your screen with a lint-free cloth to remove any dirt.
Make sure that there are no dust particles or oil deposits on your screen.
Step 1: Starting at one edge, slowly peel back the larger backing of the screen film.
Step 2: Align the edge of the film to your screen.
Step 3: Gently peel back the larger backing of the screen film and allow screen film to fall onto your screen.
Step 4: Use a lint-free cloth to secure the film to your screen and rub out the air bubbles to ensure proper adhesion. There may be temporary air bubbles in the silicone adhesive. Unless there is dust trapped under the film, these air bubbles will disappear in time. If dust is trapped under the film, attach a piece of cellophane tape to the corner of the film closest to the air bubble and lift up. Take a second piece of tape and dab the piece of dust. Once the piece of dust has been removed from the film or the screen, lay the film back down using a lint-free cloth to push out any air bubbles.
Step 5: If you wish to remove the film from your screen, apply a strip of cellophane tape to the corner of the film and use it to peel the film off of the surface of the screen.
854616005245 - Power Support Anti-Glare Film for iPad
MSRP: $59.00.
Special Price: $53.00.
Power Support 4-way Privacy Film for iPad
Power Support has taken privacy a step further with its revolutionary 4-way privacy film. Protect your screen from scratches, dust and dirt all while keeping your information secure. 4-way privacy film obstructs screen image from horizontal and vertical angles.
Product Decription
Includes 1 4-way privacy film
Increases security by blurring images, passwords, messages and e-mails from any side angle
Works in both horizontal and vertical positions
Protects your LCD screen from scratches, dust and dirt
Leaves no residue if film is removed
Film will not interfere with touch screen responsiveness
While this product will protect the iPad screen from scratches, please note that the film itself may dent or scratch. It is not designed to be scratch proof. The film is thicker than standard screen films due to the complex nature of 4-way privacy film. This does not have an impact on touch sensitivity.
854616005627 - Power Support 4-way Privacy Film for iPad
MSRP: $169.00.
Special Price: $152.00.
For Sales Enquiry...
my.iphone.acc@gmail.com
To place an order, please use our order form HERE...
